Hot search: 1500  DLFA 
 

LED IP67 Square Half Moon Recessed Light

Click on the image to check the artwork
unit price: negotiable
min amount:
amount:
period for delivery: Consignment Deadline Days
area: Beijing
Expiry date : Long Effective
last update: 2022-06-04 00:19
view count: 326
enquiry
Company Profile
 
 
Product details

Product Introductions:

Model LED Underground light
Materials 304 Stainless steel+aluminum
Power 3W
LED Chip CREE-XBD LED
Lumens 220LM(3W)
CRI >80Ra
Beam angle 45°
Voltage DC12-24V
Color 3000K, 4000K, 6000K
Others Red, Green, Blue, 2700K((customized))
Size Ø45XH50mm, Opening:Ø40mm
IP Rate IP67
Warranty 3 Years
Applications Plank road, terrace, steps, aisle, courtyard, hotel, KTV, etc


304 stainless steel cover, structural waterproof IP67


Lighting effect:


Features:

1.CREE-XBD

2.45 degree lens

3.304 Stainless steel cover

4.Steel shrapnel

5.Waterproof nut

6.6063 aluminum lamp body

7.High temperature wire

8.Waterproof connector


INSTALLATION:

Wiring method 1

Pre-wire laying (low-voltage end divided into positive and negative wiring)

1.Cut off the waterproof terminal of the lamp

2.Connect the lights in parallel to the pre-arranged main wire

3.After the main wire is connected to the constant voltage power supply/transformer, then connected to 110V/220V


Wiring method 2

1. Pre-wire laying (low-voltage end divided into positive and negative wiring)

2. Cut off the waterproof terminal of the lamp(Male end)

3. The extension wire is connected in parallel to the pre laid main wire

4. The male end of the waterproof terminal of the lamp is connected with the female end of the extension wire

5. After the main wire is connected to the constant voltage power supply/transformer, then connected to 110V/220V


Wiring method 3

The diversion and extension wire is 0.3 square wire.

1W lamp, it is recommended to connect up to 20 lamps per group

3W lamp, each group is recommended to connect up to 8 lamps per group


Installation method 1: direct opening installation

Wooden board, gypsum board, marble or already done wall, etc., you can directly open the hole to install, as follows

Installation method 2: Installation with embedded parts

Installed with pre-buried parts, generally applied to concrete, lawn, etc. to facilitate fixed lights, as follows: 

http://www.hydgetlighting.com/

Total0bar [View All]  Related Comments
 
More>other products

[ ProductsSearch ]  [ Send Fav ]  [ Share ]  [ Print ]  [ Send Report ]  [ Close ]

 
Home | Products | Suppliers | News | Tradeshow | Sitemap | Message | RSS Feed