Aluminum Strip for Cable

 

Cheap price: Copper strips are 3.5 times more expensive than aluminum strips , and the proportion of copper is 3.3 times that of aluminum, so aluminum strip for cable are much cheaper than copper strip cable, suitable for low-cost projects or temporary electricity use.

The aluminum strip for cable is very light: the weight of aluminum strips for cable is 40% that of copper strips cable, and the construction and transportation costs are low.

Antioxidant and corrosion-resistant: Aluminum strips for cable reacts quickly with oxygen in the air to form an oxide film, which can prevent further oxidation. Therefore, aluminum strips are a necessary material for high voltage, large cross-section, and large-span overhead transmission, but these advantages of being used for low-voltage lines no longer exist.

 

 

Grades	1050, 1350,1060,1070
Temper	O
Thickness	0.1mm-4.0mm
Width	10mm-1000mm
Edge	Deburred/Angles chamfers /Round
Weight Tolerance	-5%--+10%
Core (ID)	Ø100mm, Ø150mm, Ø300mm or customized
Standards	EN AW-1350 EN AW-1370 EN14121 or as customer's specification

 

 

Our technical expert have long time experience for aluminum strips slitting and edging.we fitted state of art machines for processing, we have a total solution for strips edging system . aluminum strips edge is excellent to meet the requirements of cable.

 

 

●Giner have powerful raw material sourcing channel.

●7S management of the total QC control.

●Huge stock can meet the all kinds of customer's requirement.

●On time delivery.

●100% Qualified rate.

 

 

1.Aluminum ingots into furnace and by heating to remove impurities;

2.The aluminum liquid into rolling machine into thick plates;

3.The thick plate processing by cold rolling mill ;

4.Natural annealing;

5.Slitting and trimming → Edging → Finished product→Packing.

 

http://www.gintetech.com/